OPTPDD Broadband Damping Optical Platform
.jpg)
The honeycomb optical platform tabletop has high strength, requires minimal maintenance and adjustment, and has a stable structure.
The four corners of the honeycomb optical platform tabletop are equipped with passive damping devices (TMDs). These are passive vibration reduction devices composed of a mass, spring, and damper, attached to the structure to reduce its dynamic response.
The damper's frequency is tuned to a specific structural frequency, so when that frequency is excited, the damper will produce out-of-phase resonance with the structure's motion. Energy is dissipated onto the structure through the inertial force of the damper. With proper tuning, the TMD will replace the high peak of the structural resonance frequency with two much smaller peaks.
The four corners of the honeycomb optical platform tabletop are equipped with passive damping devices (TMDs). These are passive vibration reduction devices composed of a mass, spring, and damper, attached to the structure to reduce its dynamic response.
The damper's frequency is tuned to a specific structural frequency, so when that frequency is excited, the damper will produce out-of-phase resonance with the structure's motion. Energy is dissipated onto the structure through the inertial force of the damper. With proper tuning, the TMD will replace the high peak of the structural resonance frequency with two much smaller peaks.
Product Features
➤ Broadband damping structured work surface can eliminate surface resonance, honeycomb core
➤ Lightweight, 5 mm thick 430 stainless steel work surface with good rigidity
➤ Vertically bonded truss hexagonal honeycomb core
➤ Sealed holes with easy-to-clean polymer cups
➤ No welding stress, tabletop will not warp over time due to stress
➤ High performance at a low cost
➤ Broadband damping structured work surface can eliminate surface resonance, honeycomb core
➤ Lightweight, 5 mm thick 430 stainless steel work surface with good rigidity
➤ Vertically bonded truss hexagonal honeycomb core
➤ Sealed holes with easy-to-clean polymer cups
➤ No welding stress, tabletop will not warp over time due to stress
➤ High performance at a low cost
Honeycomb structure vibration isolation platform table, used as a carrier for optical experiments, medical experiments, precision instrument production and testing, aerospace experiments, and more.
Due to its high stiffness-to-weight ratio, it can improve experimental accuracy and provide a solid mounting platform. Its structure is a honeycomb hollow design, including upper and lower panels, polymer cups, and a honeycomb core panel.
It facilitates the fixed installation of experimental accessories. The panels are made of high magnetic permeability stainless steel (430), which does not rust on the surface, ensuring laboratory cleanliness.
The polymer cups are made of stretched aluminum stamping, preventing internal noise vibrations from causing experimental errors, while also being dustproof, waterproof, and preventing small objects from falling into the platform, making cleaning easier.
The internal honeycomb core panel is made from trapezoidal thin steel plates bonded together with steel plates in between to form a honeycomb shape. This structure maintains stiffness while reducing the core panel's weight.
Due to its high stiffness-to-weight ratio, it can improve experimental accuracy and provide a solid mounting platform. Its structure is a honeycomb hollow design, including upper and lower panels, polymer cups, and a honeycomb core panel.
It facilitates the fixed installation of experimental accessories. The panels are made of high magnetic permeability stainless steel (430), which does not rust on the surface, ensuring laboratory cleanliness.
The polymer cups are made of stretched aluminum stamping, preventing internal noise vibrations from causing experimental errors, while also being dustproof, waterproof, and preventing small objects from falling into the platform, making cleaning easier.
The internal honeycomb core panel is made from trapezoidal thin steel plates bonded together with steel plates in between to form a honeycomb shape. This structure maintains stiffness while reducing the core panel's weight.
.jpg)
25/50 series
| Product structure and characteristics | |
|---|---|
|
Damping
structure
|
The use of a broadband Damping structure (microporous air
Damping) eliminates surface resonances
|
|
Table top
material
|
It is made of high permeability stainless steel, 1Cr17 material
(430), surface polishing matt Midi texture treatment or 304
stainless steel material.
|
|
Inner core
structure
|
The inner core adopts a honeycomb structure, and an
isolation cup is installed on the reverse side of the table
top, and the isolation cup is made of stretched aluminum
stamping or nylon material isolation cup; It can be dustproof,
waterproof, and prevent small items from falling into the
inside of the platform, which is easy to clean.
|
|
Table top
baseplate
|
Use carbon steel plate, do anti-rust treatment or use stainless
steel material.
|
| Side hoardings |
It is made of high-density compressed synthetic panel,
aluminum-plastic panel and stainless steel cladding.
|
|
Threaded holes
in the table top
|
M6 screw hole, hole spacing 25×25 mm, hole margin 37.5
mm.
|
|
Flatness of the
table top
|
±0.1 mm/m2 |
|
Surface
roughness
|
0.8 - 1.6 μm |
| OPTPDD 25 Series |
Length × Width × Height |
Weight kg |
|
|---|---|---|---|
| mm | in | ||
| OPTPDD-0504-25H-I/M | 500*400*25 | 20*16*1 | 16 |
| OPTPDD-0505-25H-I/M | 500*500*25 | 20*20*1 | 20 |
| OPTPDD-0605-25H-I/M | 600*500*25 | 24*20*1 | 24 |
| OPTPDD-0606-25H-I/M | 600*600*25 | 24*24*1 | 29 |
| OPTPDD-0707-25H-I/M | 700*700*25 | 28*28*1 | 40 |
| OPTPDD-0808-25H-I/M | 800*800*25 | 32*32*1 | 51 |
| OPTPDD-0906-25H-I/M | 900*600*25 | 36*24*1 | 43 |
| OPTPDD-0975-25H-I/M | 900*750*25 | 36*30*1 | 54 |
| OPTPDD-0909-25H-I/M | 900*900*25 | 36*36*1 | 65 |
| OPTPDD-1006-25H-I/M | 1000*600*25 | 40*24*1 | 48 |
| OPTPDD-1075-25H-I/M | 1000*750*25 | 40*30*1 | 60 |
| OPTPDD-1010-25H-I/M | 1000*1000*25 | 40*40*1 | 80 |
| OPTPDD-1206-25H-I/M | 1200*600*25 | 48*24*1 | 58 |
| OPTPDD-1290-25H-I/M | 1200*900*25 | 48*36*1 | 86 |
| OPTPDD-1212-25H-I/M | 1200*1200*25 | 48*48*1 | 115 |
| OPTPDD-1509-25H-I/M | 1500*900*25 | 60*36*1 | 108 |
| OPTPDD-1512-25H-I/M | 1500*1200*25 | 60*48*1 | 144 |
| OPTPDD-1515-25H-I/M | 1500*1500*25 | 60*30*1 | 180 |
| OPTPDD 50 series |
Length × Width × Height |
Weight kg |
|
|---|---|---|---|
| mm | in | ||
| OPTPDD-0504-50H-I/M | 500*400*50 | 20*26*2 | 20 |
| OPTPDD-0505-50H-I/M | 500*500*50 | 20*20*2 | 25 |
| OPTPDD-0605-50H-I/M | 600*500*50 | 24*20*2 | 30 |
| OPTPDD-0606-50H-I/M | 600*600*50 | 24*24*2 | 36 |
| OPTPDD-0707-50H-I/M | 700*700*50 | 28*28*2 | 49 |
| OPTPDD-0808-50H-I/M | 800*800*50 | 32*32*2 | 64 |
| OPTPDD-0906-50H-I/M | 900*600*50 | 36*24*2 | 54 |
| OPTPDD-0975-50H-I/M | 900*750*50 | 36*30*2 | 67 |
| OPTPDD-0909-50H-I/M | 900*900*50 | 36*36*2 | 81 |
| OPTPDD-1006-50H-I/M | 1000*600*50 | 40*24*2 | 60 |
| OPTPDD-1075-50H-I/M | 1000*750*50 | 40*30*2 | 75 |
| OPTPDD-1010-50H-I/M | 1000*2000*50 | 40*40*2 | 100 |
| OPTPDD-1206-50H-I/M | 1200*600*50 | 48*24*2 | 72 |
| OPTPDD-1290-50H-I/M | 1200*900*50 | 48*36*2 | 108 |
| OPTPDD-1212-50H-I/M | 1200*2200*50 | 48*48*2 | 144 |
| OPTPDD-1509-50H-I/M | 1500*900*50 | 60*36*2 | 135 |
| OPTPDD-1512-50H-I/M | 1500*2200*50 | 60*48*2 | 180 |
| OPTPDD-1806-50H-I/M | 1800*600*50 | 72*24*2 | 108 |
| OPTPDD-1809-50H-I/M | 1800*900*50 | 72*36*2 | 162 |
| OPTPDD-1812-50H-I/M | 1800*900*50 | 72*48*2 | 216 |
.jpg)
| Structure | Metric | Imperial |
| Honeycomb core | 0.25 mm | 1 in |
| Core internal size | 2.9 cm² | 0.4 in² |
|
Core internal
modulus
|
20000 kgf/cm² | 275000 psi |
| Surface accuracy | ±0.1 mm 600*600 mm | ±0.004 in 2*2 ft |
| Upper surface cover |
5.0 mm thickness
430 series stainless steel
|
0.2 in thickness
430 series stainless steel
|
| Lower surface cover | 5 mm armor plate | 0.2 in armor plate |
| Side panels |
2.5 mm steel plate
combination high
damping composite
timber
|
0.1 in steel plate
combination high
damping composite
timber
|
| Mounting holes | M6 - 1.0 mm | 1/4-20 in |
|
Mounting hole
pattern
|
25 mm grid | 1 in grid |
|
Mounting hole
borders
|
37.5 mm | 1.5 in |
|
Mounting hole
sealing
|
25 mm cylindrical cup
(Corrosion-resistant nylon
material)
|
1 in cylindrical cup
(Corrosion-resistant nylon
material)
|
| Damping | Broadband damping | |
| OPTPDD 100 series |
Length × Width × Height |
Weight kg |
|
|---|---|---|---|
| mm | in | ||
| OPTPDD-0504-100H-I/M | 500*400*100 | 20*26*4 | 24 |
| OPTPDD-0505-100H-I/M | 500*1000*100 | 20*20*4 | 30 |
| OPTPDD-0605-100H-I/M | 600*1000*100 | 24*20*4 | 36 |
| OPTPDD-0606-100H-I/M | 600*600*100 | 24*24*4 | 43 |
| OPTPDD-0707-100H-I/M | 700*700*100 | 28*28*4 | 60 |
| OPTPDD-0808-100H-I/M | 800*800*100 | 32*32*4 | 77 |
| OPTPDD-0906-100H-I/M | 900*600*100 | 36*24*4 | 65 |
| OPTPDD-0975-100H-I/M | 900*750*100 | 36*30*4 | 81 |
| OPTPDD-0909-100H-I/M | 900*900*100 | 36*36*4 | 97 |
| OPTPDD-1006-100H-I/M | 1000*600*100 | 40*24*4 | 72 |
| OPTPDD-1075-100H-I/M | 1000*750*100 | 40*30*4 | 84 |
| OPTPDD-1010-100H-I/M | 1000*2000*100 | 40*40*4 | 121 |
| OPTPDD-1206-100H-I/M | 1200*600*100 | 48*24*4 | 86 |
| OPTPDD-1290-100H-I/M | 1200*900*100 | 48*36*4 | 130 |
| OPTPDD-1212-100H-I/M | 1200*2200*100 | 48*48*4 | 172 |
| OPTPDD-1509-100H-I/M | 1500*900*100 | 60*36*4 | 162 |
| OPTPDD-1512-100H-I/M | 1500*2200*100 | 60*48*4 | 216 |
| OPTPDD-1806-100H-I/M | 1800*600*100 | 72*24*4 | 130 |
| OPTPDD-1809-100H-I/M | 1800*900*100 | 72*36*4 | 194 |
| OPTPDD-1812-100H-I/M | 1800*900*100 | 72*48*4 | 260 |
| OPTPDD-2010-100H-I/M | 2000*1000*100 | 80*36*4 | 216 |
| OPTPDD-2012-100H-I/M | 2000*1200*100 | 80*48*4 | 288 |
| OPTPDD-2409-100H-I/M | 2400*900*100 | 96*36 | 260 |
| OPTPDD-2412-100H-I/M | 2400*1200*100 | 96*48 | 346 |
| OPTPDD 200 series |
Length × Width × Height |
Weight kg |
|
|---|---|---|---|
| mm | in | ||
| OPTPDD-1010M/E-200H | 1000*1000*200 | 40*40*8 | 139 |
| OPTPDD-1212M/E-200H | 1200*1200*200 | 48*48*8 | 201 |
| OPTPDD-1575M/E-200H | 1500*750*200 | 60*30*8 | 157 |
| OPTPDD-1509M/E-200H | 1500*900*200 | 60*36*8 | 188 |
| OPTPDD-1510M/E-200H | 1500*1000*200 | 60*40*8 | 209 |
| OPTPDD-1512M/E-200H | 1500*1200*200 | 60*48*8 | 251 |
| OPTPDD-1515M/E-200H | 1500*1500*200 | 60*60*8 | 313 |
| OPTPDD-1807M/E-200H | 1800*700*200 | 72*28*8 | 175 |
| OPTPDD-1875M/E-200H | 1800*750*200 | 72*30*8 | 188 |
| OPTPDD-2009M/E-200H | 2000*900*200 | 80*36*8 | 251 |
| OPTPDD-2010M/E-200H | 2000*1000*200 | 80*40*8 | 278 |
| OPTPDD-2012M/E-200H | 2000*1200*200 | 80*48*8 | 334 |
| OPTPDD-2015M/E-200H | 2000*1500*200 | 80*72*8 | 417 |
| OPTPDD-2409M/E-200H | 2400*900*200 | 96*36*8 | 301 |
| OPTPDD-2410M/E-200H | 2400*1000*200 | 96*40*8 | 334 |
| OPTPDD-2412M/E-200H | 2400*1200*200 | 96*48*8 | 401 |
| OPTPDD-2415M/E-200H | 2400*1500*200 | 96*72*8 | 501 |
| OPTPDD-2508M/E-200H | 2500*800*200 | 100*32*8 | 278 |
| OPTPDD-3009M/E-200H | 3000*900*200 | 120*36*8 | 376 |
| OPTPDD-3010M/E-200H | 3000*1000*200 | 120*40*8 | 417 |
| OPTPDD-3012M/E-200H | 3000*1200*200 | 120*48*8 | 501 |
| OPTPDD-3015M/E-200H | 3000*1500*200 | 120*60*8 | 626 |
| OPTPDD-3612M/E-200H | 3600*1200*200 | 144*48*8 | 601 |
| OPTPDD-3615M/E-200H | 3600*1500*200 | 144*60*8 | 751 |
300/400series.jpg)
| OPTPDD 300 series |
Length × Width × Height |
Weight kg |
|
|---|---|---|---|
| mm | in | ||
| OPTPDD-1010M/E-300H | 1000*1000*300 | 40*40*12 | 165 |
| OPTPDD-1212M/E-300H | 1200*1200*300 | 48*48*12 | 238 |
| OPTPDD-1575M/E-300H | 1500*750*300 | 60*30*12 | 186 |
| OPTPDD-1509M/E-300H | 1500*900*300 | 60*36*12 | 223 |
| OPTPDD-1510M/E-300H | 1500*1000*300 | 60*40*12 | 248 |
| OPTPDD-1512M/E-300H | 1500*1200*300 | 60*48*12 | 297 |
| OPTPDD-1515M/E-300H | 1500*1500*300 | 60*60*12 | 372 |
| OPTPDD-1807M/E-300H | 1800*700*300 | 72*28*12 | 223 |
| OPTPDD-1875M/E-300H | 1800*750*300 | 72*30*12 | 268 |
| OPTPDD-2009M/E-300H | 2000*900*300 | 80*36*12 | 297 |
| OPTPDD-2010M/E-300H | 2000*1000*300 | 80*40*12 | 330 |
| OPTPDD-2012M/E-300H | 2000*1200*300 | 80*48*12 | 396 |
| OPTPDD-2015M/E-300H | 2000*1500*300 | 80*72*12 | 495 |
| OPTPDD-2409M/E-300H | 2400*900*300 | 96*36*12 | 357 |
| OPTPDD-2410M/E-300H | 2400*1000*300 | 96*40*12 | 396 |
| OPTPDD-2412M/E-300H | 2400*1200*300 | 96*48*12 | 476 |
| OPTPDD-2415M/E-300H | 2400*1500*300 | 96*72*12 | 594 |
| OPTPDD-2508M/E-300H | 2500*800*300 | 100*32*12 | 620 |
| OPTPDD-3009M/E-300H | 3000*900*300 | 120*36*12 | 446 |
| OPTPDD-3010M/E-300H | 3000*1000*300 | 120*40*12 | 495 |
| OPTPDD-3012M/E-300H | 3000*1200*300 | 120*48*12 | 594 |
| OPTPDD-3015M/E-300H | 3000*1500*300 | 120*60*12 | 743 |
| OPTPDD-3612M/E-300H | 3600*1200*300 | 144*48*12 | 713 |
| OPTPDD-3615M/E-300H | 3600*1500*300 | 144*60*12 | 891 |
| OPTPDD 400 series |
Length × Width × Height |
Weight kg |
|
|---|---|---|---|
| mm | in | ||
| OPTPDD-1812M/E-400H | 1800*1200*400 | 72*48*16 | 471 |
| OPTPDD-1815M/E-400H | 1800*1500*400 | 72*60*16 | 589 |
| OPTPDD-2010M/E-400H | 2000*1000*400 | 80*40*16 | 436 |
| OPTPDD-2012M/E-400H | 2000*1200*400 | 80*48*16 | 524 |
| OPTPDD-2015M/E-400H | 2000*1500*400 | 80*60*16 | 654 |
| OPTPDD-2409M/E-400H | 2400*900*400 | 96*36*16 | 471 |
| OPTPDD-2410M/E-400H | 2400*1000*400 | 96*40*16 | 524 |
| OPTPDD-2412M/E-400H | 2400*1200*400 | 96*48*16 | 628 |
| OPTPDD-2415M/E-400H | 2400*1500*400 | 96*60*16 | 785 |
| OPTPDD-3009M/E-400H | 3000*900*400 | 120*36*16 | 589 |
| OPTPDD-3010M/E-400H | 3000*1000*400 | 120*40*16 | 654 |
| OPTPDD-3012M/E-400H | 3000*1300*400 | 120*48*16 | 785 |
| OPTPDD-3015M/E-400H | 3000*1500*400 | 120*60*16 | 981 |
| OPTPDD-3612M/E-400H | 3600*1200*400 | 144*48*16 | 942 |
| OPTPDD-3615M/E-400H | 3600*1500*400 | 144*60*16 |
1178 |
