ADS-ICD Air Spring Isolator
ADS-ICD Construction:
Membrane-based pneumatic spring element with housing,
carrier and base plate made of aluminium
ADS-ICD Construction:
ICD Air Spring System Composition:
Options:
➤Control unit: Circuit board inside a plastic housing
➤ Connector for the control cable
➤The filter and regulator assembly consists of a pressure regulator, a pressure gauge, a filter, and a water separator
System Functions:
Membrane-based pneumatic spring element with housing,
carrier and base plate made of aluminium
ICD Air Spring System Composition:
➤ 4 supporting points
- 3 pneumatic springs ADS type Master with sensors and control valves
- 1 pneumatic spring ADS type Slave without sensors and valves
➤1 control unit, 3-channel circuit board with USB interface
➤ Communication cable for the main control spring
➤ Pressure Regulating Valve (NW 4 Module)
➤ Communication cable for the main control spring
➤ Pressure Regulating Valve (NW 4 Module)
➤ Power adapter
Options:
➤Control unit: Circuit board inside a plastic housing
➤ Connector for the control cable
➤The filter and regulator assembly consists of a pressure regulator, a pressure gauge, a filter, and a water separator
➤Control cable: length of 3 control cables to customer specifications
➤ Air level control software
➤USB cable
➤Depending on the number of air springs, add hoses and connectors
System Functions:
Air springs have factory default configurations.The following parameters can be changed by
means of the control software: reset accuracy, permissible deformation, response time, average height.
These parameters can be viewed, adjusted, and permanently stored in each spring. These values are retained even after a power outage. The default configuration can be restored via the control software.
Control Unit
Adjust Parameters
➤ Reset Accuracy:
- Coarse (± 0.5 mm)
- Fine (± 0.1 mm)
- User Defined (± 0.01 - 1 mm)
➤ Allowed Deviation (Deformation Amount)
- Wide (± 1.0 mm)
- Narrow (± 0.5 mm)
- User Defined (± 0.01 - 1.5 mm)
➤ Response Time
- Fast (10 ms)
- Slow (125 ms)
- User Defined (5 - 125 ms)
➤ Working Height
- Intermediate Position (± 5 mm)
- Potentiometer Adjustment
- Control Software Adjustment
Performance Parameters:
➤ Load range: 8 - 182 kN
➤ Two height options available for each model
Adjust Parameters
➤ Reset Accuracy:
- Coarse (± 0.5 mm)
- Fine (± 0.1 mm)
- User Defined (± 0.01 - 1 mm)
➤ Allowed Deviation (Deformation Amount)
- Wide (± 1.0 mm)
- Narrow (± 0.5 mm)
- User Defined (± 0.01 - 1.5 mm)
➤ Response Time
- Fast (10 ms)
- Slow (125 ms)
- User Defined (5 - 125 ms)
➤ Working Height
- Intermediate Position (± 5 mm)
- Potentiometer Adjustment
- Control Software Adjustment
Performance Parameters:
➤ Load range: 8 - 182 kN
➤ Two height options available for each model
|
ADS-ICD series |
D | H0 | Ni | A |
Maximum load kN |
| ADS 3 | 105 | 65 | ± 5 | 106 | 1.8 |
| ADS 6 | 127 | 90 | ± 6 | 130 | 2.8 |
| ADS 12 | 175 | 90 | ± 6 | 175 | 6.0 |
| SLM 12 B | 170 | 90 | ± 6 | 175 | 6.0 |
| ADS 24 | 245 | 90 | ± 6 | 255 | 13.0 |
| ADS 48 | 338 | 90 | ± 6 | 343 | 26.0 |
| ADS 96 | 468 | 90 | ± 6 | 470 | 55.0 |
| ADS 192 | 610 | 90 | ± 6 | 610 | 100.0 |
Product Gallery
