LOW DEFLECTION MOUNTS LOW LOADS
DESCRIPTION
➤ The main role of these mounts is to isolate vibration. A snubber system limits the movement of the suspended mass (10 mm).
➤.A wide load range from 0,5 to 32 daN depending upon the application.
➤ In case of shock protection, the structural resistance of the mount can accept acceleration of up to 150 g.
➤.A wide load range from 0,5 to 32 daN depending upon the application.
➤ In case of shock protection, the structural resistance of the mount can accept acceleration of up to 150 g.
➤Fixation on the inside or on the outside.
CHARACTERISTICS
➤ Natural frequencies (vertical and lateral) under a nominal load of 5 to 8 Hz.
➤ B = unloaded.
➤ B - 6 mm height under nominal load (deformation under load . 6 mm).
➤ Maximum deflection from loaded position ± 10 mm in all directions (vertical and lateral).
➤ Stop at 10 mm deflection, maximum acceptable loads = 150 x nominal static load.
