LDS-MD/ICD Air Spring Isolator
➤ LDS-P series air springs are constructed with an ADS spring and a
pendulum bar, which reduces the natural frequency in the horizontal
direction while maintaining the inherent characteristics of the ADS
spring.
➤ LDS-LP is based on the ADS air spring, and the solvent of the air
damping cavity is added, so as to obtain a lower natural frequency.
➤ LDS-MD/ICD adopts the horizontal height control mode of MD
mechanical proportional valve and the ICD electronically controlled
non-contact height control mode respectively, providing different
solutions for different applications.
➤ LDS-P/LP-MD adopts a square leg structure. LDS-P/LP-ICD has a round-legged structure.
| LDS | LDS-P | LDS-LP |
| Vertical natural frequency | 2.0-2.5 Hz | 1.0-1.5Hz |
| Horizontal natural frequency | 2.0-2.5 Hz | 1.0-1.5Hz |
| LDS-MD/ICD series |
Installation height H0 |
Working height Ni |
Maximum load kN |
| LDS-1-P/LP | 600-700 | ±5 | 0.98 |
| LDS-3-P/LP | ±5 | 1.8 | |
| LDS-6-P/LP | ±6 | 2.8 | |
| LDS-12-P/LP | ±6 | 6.0 | |
| LDS-24-P/LP | 400-500 | ±6 | 13.0 |
| LDS-48-P/LP | ±6 | 26.0 | |
| LDS-96-P/LP | ±6 | 55.0 | |
| LDS-192-P/LP | ±6 | 100.0 |
