CUPMOUNT Rubber Isolator
Natural frequency: 25-35 Hz
The CUPMOUNT base consists of a rubber ring and two bonded cup-shaped metal bodies, a base support metal plate, and a central shaft.
Central shaft: Zinc-plated low carbon steel with threaded hole.
Support metal plate: Zinc-plated low carbon steel with 4 holes.
Design features: Axial and radial stiffness ratio is 1:1, very stable.
Application areas:
Engines, pumps, air conditioning, ventilation equipment, transformers, etc.
The CUPMOUNT base consists of a rubber ring and two bonded cup-shaped metal bodies, a base support metal plate, and a central shaft.
Central shaft: Zinc-plated low carbon steel with threaded hole.
Support metal plate: Zinc-plated low carbon steel with 4 holes.
Design features: Axial and radial stiffness ratio is 1:1, very stable.
Application areas:
Engines, pumps, air conditioning, ventilation equipment, transformers, etc.
➤ Four modes: bearing capacity of 1-1000 daN
➤ Axial and radial stiffness support
➤ Can be installed in multiple directions: compression, tension, and shear
➤ Nitrile rubber oil-resistant
➤ Easy and convenient to install
➤ Axial and radial stiffness support
➤ Can be installed in multiple directions: compression, tension, and shear
➤ Nitrile rubber oil-resistant
➤ Easy and convenient to install
product model: 530906
* Barry Controls product model is for reference only
|
Paulstra |
Barry Controls* |
A (mm) |
B (mm) |
φ C (mm) |
φ D (mm) |
E |
G (mm) |
H (mm) |
I (mm) |
T (mm) |
Weight (kg) |
| 530906 11/14 | C1000 | 49,5 | 60 | 58 | 5,2 | M6 | 20 | 28 | 18 | 1,6 | 0,2 |
| 530906 21/26 | C2000 | 63,5 | 75 | 76 | 6,4 | M10 | 30 | 38 | 25 | 2,3 | 0,4 |
| 530906 31/34 | C3000 | 143 | 175 | 168 | 13,5 | M16 | 65 | 90 | 59 | 4,7 | 4,5 |
| 530906 41/44 | C4000 | 108 | 133 | 124 | 11,9 | M16 | 19 | 63 | 38 | 4 | 1,8 |
