ISODYNE Mount
The ISODYNE® mount comprises two half mountings joined together.
The design of the ISODYNE® mount gives the following basic characteristics :
APPLICATIONS
➤ a very high axial to radial stiffness ratio;
➤ vertical fixing avoiding excessive inclination of the equipment;
➤fixing at any angle;
➤safe (551571), anti-rebound.
APPLICATIONS
ISODYNE® can be used to suspend lightweight equipment in a vertical plane.
OPERATING CHARACTERISTICS
ASSEMBLY
Fixing clearances (approximate).
| Reference |
Nominal static load
(daN) |
Deflect. (mm) |
Hardness (Shore A) |
| 551321 | 2,5 | 1 | 50 |
| 551441 | 10 | 3 | 45 |
| Reference |
Nominal static load
(daN) |
Deflect. (mm) |
Hardness (Shore A) |
| 551571 | 25 | 2,5 | 45 |
| 551571 | 35 | 2,5 | 60 |
ASSEMBLY
Fixing clearances (approximate).
| Reference |
G (mm） |
H (mm） |
| 551321 | 28 | 18 |
| 551441 | 40 | 20 |
| 551571 | 47 | 22 |
DIMENSIONS
| Reference |
Hardness (Shore A) |
B (mm) |
cp C (mm) |
D (mm) |
cp E (mm) |
F (mm) |
J (mm) |
Weight (g) |
| 551321 | 50 | 16 | 4,2 | 25,4 | 3,5 | 32 | 1,6 | 10 |
| 551441 | 45 | 18 | 6,5 | 35 | 4,2 | 44,5 | 2 | 24 |
| 551571 | 45.6 | 20 | 8,2 | 45,5 | 6,2 | 57,5 | 2 | 50 |
